Friday, April 22, 2016

Choose off-budget android-smartphone with fingerprint scanner – Overclockers.ru

Contents

 

Introduction

 

A week ago, we chose the доступный android-Smartphone with a fingerprint reader. As it turned out, even in the segment of up to 10 000 rubles, you can find a lot of models equipped with this modern option, which a few years ago could not even dream of the flagships.
 

450x341 25 KB Big one:. 1500x1138 216 KB

 

In our new guide will discuss the solutions of a class higher than previously considered. However, once a reservation: we are endowed by their attention, not all models available. The fact is that the majority of expensive smart phones, especially the флагманов, We have successfully acquired fingerprint sensor. So to allocate them in a separate category makes no sense, especially given that this function should be their default.
 

It is obvious that in a short period of outlandish fingerprint technology has become a widespread option. And once we’ve reviewed бюджетные model , remains unexplored only the middle segment.
 



Lineup

 

Xiaomi Mi4s
 

The right to open the material to give the model Xiaomi Mi4s . This current smartphone only recently in our lab, so all its features, we’ll piping hot.
 

205x450 32 KB Big one:. 683x1500 406 KB

 

In the hierarchy of mobile solutions manufacturer Xiaomi Mi4s occupies an intermediate position. By and large, it’s almost the flagship, and the corresponding price – 20 000 rubles.
 

Filling in Xiaomi Mi4s very modern, though not a top: six-core 64-bit chip Qualcomm Snapdragon 808, 3GB of RAM and a five-inch screen with a resolution of Full HD. The capacity of the built-in storage there is 64 GB, so you can take a universal slot and the second SIM-card.
 

235x450 27 KB Big one:. 783x1500 358 KB

 

Battery capacity Xiaomi Mi4s is 3260 mAh. Also, the manufacturer has used the camera resolution of 13.0 megapixels and 5.0. OS version – Android 6.0.
 

450x227 12 KB Big one:. 1500x757 193 KB

 
What about a scanner? It is installed on the back side, and, judging by the tests, the speed of the fingerprint sensor is clearly inferior to the market leaders.
 

Xiaomi Redmi Note 3 / Redmi Note 3 Pro
 

At a price of about 20 000 Xiaomi Mi4s can find a lot of strong competitors. In addition, and there are better offers within the company. For example, the same Xiaomi Redmi Note 3 can be bought already 12 000 rubles, and in fact it has more screen – 5.5 inches (resolution is similar – Full HD).
 

226x450 31 KB Big one:. 677x1350 198 KB

 

The heart of the Xiaomi Redmi Note 3 is very popular today, eight-chip MediaTek MT6795 Helio X10 (Cortex-A53, 2.0 GHz) with graphics PowerVR G6200. There are two versions of the smartphone: with 2/16 GB of RAM / ROM and 3/32.
 

And if earlier it was possible to save and to take younger modification, but now it actually lost all meaning, because Redmi Note 3 lost a microSD card slot. It also is one of the key shortcomings of the device.
 

226x450 24 KB Big one:. 678x1350 240 KB

 

The Xiaomi Redmi Note 3 installed camera resolution 13.0 and 5.0 megapixels and battery capacity of 4000 mAh.
 

Now, about the scanner. As shown by тестирование, He runs fast, stable and confident. The percentage of correct recognition of the finger from the first time – more than 90%, and the response speed declared by the manufacturer is very similar to the truth in 0.3 seconds.
 

450x300 15 KB Big one:. 1252x931 72 KB

 

Mention deserves Xiaomi Redmi Note 3 Pro. This version still had a memory card slot. And it differs a single-chip system. In this case, applied a fresh Qualcomm Snapdragon processor 650, clocked at 1.8 GHz.
 

For Xiaomi Redmi Note 3 Pro sellers are asking for at least 12-13 thousand rubles, and this price is justified in view of the filling.
 

Meizu M1 Metal
 

Recently, Meizu also establishes in its smartphones scanners prints. Moreover, the manufacturer embeds them in the key “Home” on the front panel. It did not pass the new feature and updated model of Meizu M1 Metal .
 

218x450 15 KB Big one:. 726x1500 385 KB

 

Meizu M1 Metal is one of the first fully metal company smartphones. In this case the manufacturer had used a special polymer coating that protects the body from scratches.
 

With regard to hardware stuffing, the Meizu M1 Metal is not far from the Meizu M2 Note . Here, too, used display diagonal of 5.5 inches with a resolution of Full HD. Inside hides popular SoC MediaTek MT6795 Helio X10 with eight Cortex-A53 cores and graphics PowerVR G6200.
 

216x450 14 KB Big one:. 720x1500 277 KB

 

In addition, the Meizu M1 Metal got 2 GB of RAM and 32 GB of non-volatile memory, microSD card slot and the battery capacity of 3140 mAh. Resolution of the two chambers is 13.0 and 5.0 megapixels.
 

We should also mention the operating system Meizu M1 Metal – YunOS. This is not exactly running Android, but rather an offshoot from it, but there is support for android-apps. You can also install the Google Play Store.
 

450x418 42 KB Big one:. 1076x1000 390 KB

 

In domestic retail Meizu M1 Metal can be bought for 13 000 rubles.
 

LikeTweet

No comments:

Post a Comment