| Device Type | |
| Processor | 4 cores x 1.6 GHz |
| The video | |
| Operating System | |
| RAM | |
| Flash memory | |
| Screen (size, type, resolution) | Miracast support and HDMI |
| Camera | both – without autofocus and flash |
| Tones | |
| Number of SIM-cards | |
| Support for microSD-cards | |
| Data | |
| Navigation | |
| Interfaces | |
| Battery | |
| Size | |
| Weight | |
| average price YaMarket | |
The tablet is based on a not too new SoC RockChip 3188 (quad-core ARM Cortex A9, 1.6 GHz). However, due to the number of cores and a decent processor frequency we can expect from him, if not outstanding, it is quite decent results. This contributes to the operating system Android 4.2.2. This OS is still up to date, but soon will move into the category of obsolete, having already left more recent versions.
Gadget received orientation sensor (mandatory item in today’s mobile solutions). Other sensors it does not, but there is a vibrating motor – it is not as mandatory thing, but still its presence can only be assessed positively.
Control weighing showed that the mass of the plate slightly less than stated and is 562
Packing and equipment
Tablet TurboPad packed in a box made of thick glossy cardboard with a magnetic “snaps”. Box bright, durable and beautiful; almost ready to gift wrap, and only. It is very informative: on the top cover a large font and icons are designated basic specifications.
A general view of the packing in the diagonal perspective:
For more information about the device is shown in the bottom of the box :
Specifications quite exhaustive, but they present a pair of small errors. In particular, the table stated that the outbreak of the tablet is there, but in fact it is not. It also states that it detects only five points of tangency, in fact supports all ten.
In addition, the size of the tablet, on the packaging, differ from the dimensions specified on the official site. Should trust those on the box.
Now open the box and took out her set. To put it mildly, he’s good.
The manufacturer has equipped its model charger, cable USB- microUSB to connect to the “big” computer and the USB OTG adapter for connecting external devices. But that’s not all. Please note: the charger does not end flat USB connector and a pin connector.
There is a complete and stereo. She – snow-white color, and it had to be photographed on a black background, otherwise it is difficult to be distinguished.
Is it good from an aesthetic point of view, that the whole set black and white headset, do not judge me.
And finally, the accompanying paper – “Owner’s Manual” and guarantee:
Manual in this case is not a formal document “for show “, and detailed instructions, which can be useful for beginners Android.
Imagine supplied in the form of a list:
- tablet itself;
- Charger;
- USB-microUSB cable;
- USB OTG adapter;
- Headset;
- User Manual and Warranty Card.
As you can see, everything you need in stock. One might even wish to cover, cover, but it is not needed, as there is a tablet with built-in cover. But talk about this in the next section.
In the meantime, briefly go back to the charger. We consider it more closely, in order to get acquainted with the technical parameters:
The charger is quite powerful and can give a current of up to 2 A. Connect the tablet is round connector. Moreover, the gadget can be charged only from him, through the USB port to charge it can not.
Appearance and design
As mentioned above, the tablet TurboPad 890 received a very rare design with built-in cover. Its front side is connected to the rear cover one-piece manner. This here is the solution – elegant but not unambiguous. The elegance is that by combining the device with the housing cover almost does not weigh down its structure.
A possible “minus” of this solution is that when the cover is worn, it will be impossible to replace. Can only be cut in the front side and buy a standard cover for the tablet. In addition, the cover does not cover the chamber, whereby the window it can be scratched. Whether to regret it – sort out the relevant chapter.
Here is the plate, closed cover:
It stylized textiles, but actually made flexible plastic with an embossed “textile” relief.
It’s now time to reveal the cover and look at the hero of the review, the screen is covered with a protective film advertising:
Then remove the tape and solemnly include tablet, the screen which there is a screen saver with soft colors. In the picture below the cover is folded to the back side of the machine.
Then proceed to the examination of individual parts of appearance, for there is a very interesting and unusual moments.
In the upper part of the front side of the tablet, you can see a small window of the front camera – there’s nothing unusual. But if you shine a bright light on its lower part, the note on the window of macro photography with another sensor of unknown function:
This blue sensor could be a proximity sensor or automatic brightness adjustment; but neither one nor the other in the tablet is not listed. Does not show their presence and determine the configuration utility CPU-Z. It is possible that the sensor is soldered to the board, but is not involved in the firmware.
Now flip the plate and consider the opposite direction, where there is also a little surprise.
Top slot located speakers and the rear window of the chamber, and bottom – hole «Reset», denoted by the letter «R»; as well as the labels for the connectors on the bottom side of the device.
In the enlarged fragment of the back cover with the camera and speakers is as follows:
Note that the camera window or recessed with respect to the extent not its scope, and therefore can be easily scratched. This combined with a weak resolution camera (2 megapixels) can really “finish” quality. In addition, the window devoid of anti-reflective coating. By the way, the picture above is noticeable structure plastic back cover, which resembles the skin (but are not).
the right side of the back cover is visible seam, which is sewn the front side of the cover plate to the plastic cover. And here it comes the turn and that “surprise”. Closeup shows that it is not any seam and joint simulation.
The autopsy revealed that in fact the cover is connected to the rear lid adhesive and bonding it is on the inner side of the lid.
Consider the plate in the lateral angles. View from above:
The top of the present volume rocker and power button / off. Rocker button set soundly, not “hang out”, pressing clear; but maybe pressing force rocker slightly big.
Bottom view:
The lower bound – the most versatile. There are (left to right): microSD slot card, power connector, headset jack, microphone hole, plug MiniHDMI, connector microUSB, a slot for “Sims”.
View from the right:
On the right side is nothing.
Left view.
And on the left side, too, there is nothing. By the way, this photo was taken with the folded cover (it is visible in the form of a thin strip from the bottom). A previous photos were taken with an open and “cut” in a graphics editor cover (so you can see more clearly the tablet itself).
To the previously set out remains to add that the assembled plate very high quality. No backlash and no gaps. In attempts to moderate the impact of the power (without the threat of damage) can be heard only very minor scratches.
Now let me photos of the inner world of the hero of view (such images in the testing process are done rarely, so accidentally during disassembly not to damage the material value):
At the bottom we see two dark plate, covering the chip. These plates are not really dark and shiny (metal). They have turned dark because the light source is at an angle and is not reflected in them.
Please note that the battery does not go three and not four, but only two wires. This means that the temperature sensor there is no; either it is, but is not connected. To this question will be back later.
No comments:
Post a Comment